2,922 (rnd) Reviews Scanned
Bestseller No. 1
A.D International Threading & Tapping Attachment-lathe tailstock die holder set Machine Tools (MT2)
- Meticulously crafted tool set designed for threading and tapping operations on lathe machines
- Includes die holder sizes of 13/16", 1", and 1-1/2" for compatibility with various die sizes
- Broad tapping capacity ranging from 1/16" to 1/4" and 1/4" to 1/2" to accommodate different tap sizes
- Facilitates internal bore threading and tapping operations with remarkable precision
- Features a precisely ground MT2 shank for stable and secure operation designed for easy mounting on lathe machines
Bestseller No. 2
PRAZTECH® MT2 Shank Threading & Tapping Attachment | Morse Taper 2 Lathe Tailstock Die Holder Set |...
- Used for threading and tapping purpose on the lathe machine
- Die Holder Sizes 13/16", 1" & 1-1/2" . Tapping Capacity of the Tap Wrench : 1/16" to 1/4" & 1/4" to 1/2"
- Comes in precisely ground MT2 Shank, that goes inisde your lathe tailstock & intended job for threading / tapping is hold in rotating chuck.
- Well Finished, Alloy Tool Steel Contructed, with knurled body, Engineered by PRAZTECH
Bestseller No. 3
PRAZTECH® MT3 Shank Threading & Tapping Attachment | Morse Taper 3 Lathe Tailstock Die Holder Set |...
- Praztech Engineering
- Used for threading and tapping purpose on the lathe machine
- Die Holder Sizes 13/16", 1" & 1-1/2" . Tapping Capacity of the Tap Wrench : 1/16" to 1/4" & 1/4" to 1/2"
- Comes in precisely ground MT3 Shank, that goes inisde your lathe tailstock & intended job for threading / tapping is hold in rotating chuck.
- Made of High Quality Tool Steel , this is a high quality product for your lathe machine Used for threading and tapping purpose on the lathe machine...
Bestseller No. 4
HHIP 3906-4910 Mt2 Tailstock Die Holder Set
- The set includes tapered shank, pin punch & 4 die holders
- Dies holder sizes are 13/16, 1, 1-5/16 & 1-1/2"
- Easy to knock out pin with a pin punch
- Tang end
- Completely interchangeable to fit tapered shank with the help of a pin which allows about 1-1/2" travel
Bestseller No. 5
NEW MT2 Shank Lathe Tailstock Tap And Die Holder Set Sliding Floating Type
- This is a Quality Attachment for threading, tapping and reaming operation on your lathe machine
- Dies size holding capacity - 5/8",13/16", 1" , 1-5/16" & 1-1/2"
- BABY CHUCK ADAPTER 14 X 1.00 MM
- YOU CAN USE CHUCK WITH TAP & DIE HOLDER
- Tap holding capacity of the 2 tap wrenches available in this set along are : 1/16" to 1/4" (M1.5 to M6) & 1/4" to 1/2" (M6 to M12)
SaleBestseller No. 6
Tapping, reaming and Threading die Holder Set for Lathe Tailstock Machine Tools (MT1)
- Made of High Quality Tool Steel , this is a high quality tailstock die holder for threading, tapping and reaming operation on your lathe machine
- Imperial dies size holding capacity - 13/16", 1" & 1-1/2" Inches
- Tap holding capacity of the 2 tap wrenches supplied along are : 1/16" to 1/4" (M2 to M6) & 1/4" to 1/2" (M6 to M12) Inches
- Comes with a hard and precisely ground shank MT1
- The Die for threading purpose is hold in the various Die holder sizes. The internal bore threading/ tapping is done by mounting the tap wrench head as...
Bestseller No. 7
Atech Tools Threading & Tapping Attachment Lathe Tailstock Tap & Die Holder (MT3)
- Comprehensive threading and tapping attachment set designed for lathe tailstock operations
- Will hold Round Button Dies having O.D. 13/16", 1", and 1-1/2"
- Broad tapping capacity: 1/16" to 1/4" and 1/4" to 1/2" to accommodate different tap sizes
- Knurled Sleeve Holder With Threaded Stop handle
- Facilitates internal bore threading and tapping operations with exceptional precision
Bestseller No. 8
Gripfast Threading & Tapping Attachment Lathe Tailstock Tap & Die Holder set MT-2
- Made of High Quality Tool Steel , Used for threading and tapping purpose on the lathe machine Die Holder Sizes 13/16", 1" & 1-1/2" . Tapping Capacity...
- GRIP-FAST Threading & Tapping Attachment: A versatile tool designed for threading and tapping operations on a lathe. Lathe Tailstock Die Holder Set:...
- Easy Installation: User-friendly design for easy attachment to the lathe tailstock, facilitating quick setup and efficient use. Enhances Lathe...
- Machine Tools MT 2 Compatibility: Engineered to fit Machine Tools with a Morse Taper 2 (MT 2) spindle, providing compatibility with a variety of lathe...
- Secure Grip Mechanism: Incorporates a secure grip mechanism to firmly hold dies, ensuring stability during threading operations. Professional-Grade...
Bestseller No. 9
A.D. International Precision Lathe Tailstock Imperial Rigid Die Holder for threading Lathe Machine...
- Threading kit for your lathe machine available in morse taper MT1/ MT2 & MT3 shank's tailstock
- Made of quality tool steel. Shanks are precisely ground.
- Much precise and accurate design with option of holding 4 imperial size round threading dies.
- It can hold 13/16", 1-5/16", 1" & 1-1/2" round dies, through 4 holders (2 on each size of the main bodies that floats on the parallel shank). Sizes...
- The morse taper goes inside your lathe's tailstock taper & the body of the holder having threading die floats on the parallel part of the shank while...
Bestseller No. 10
Floating Tailstock Die Holder 2MT Shank-Imperial Dies-Threading on Lathe Machine
- The Head Slides up and down very smoothly on the shaft.
- Die Holder Sizes : 13/16" , 1" , 1-5/16" , 1-1/2" Shank is Hard & Precisely Ground as 2MT- Morse Taper
- Holders are held on the shank by a pin which locate in slots on either side of the holder allowing about 1-1/2" of travel.
Bestseller No. 11
OMEX NEW LATHE TAILSTOCK FLOATING DIE HOLDER SET MT2 - MYFORD, ATLAS, SOUTH BEND
- LATHE TAIL STOCK FLOATING DIE HOLDER SET
- SHANK SIZE - MT 2
- Die Holders can Easily be Interchanged and comes with 4 Different Size Holders as : 13/16" , 1", 1-5/16", & 1-1/2"
- The Die Holders Travels Smoothly over the Straight Shank.
Bestseller No. 12
Lathe's 3MT Tailstock Die Holders 13/16",1", 1-5/16",1-1/2" Imperial-Threading Machine Tools
- Multiple Dies Holder Set for Lathe Tailstock Attachment in 3MT Shank
- Hard & Precisely Ground Shank
- Imperial Standard -Can accommodate 4 Different Die Sizes
Bestseller No. 13
Tapping and threading die holder set for lathe tailstock (MT3)
- Quality Steel tailstock die holder for threading tapping and reaming lathe machine tools dies size holding capacity 13/16" 1" & 1-1/2" Tap the 2 tap...
- 3 Die Holders -: 13/16" , 1" , 1-1/2"
- 2 Tap Chucks Holding Capacity -: 0 to 1/4" & 1/4" to 1/2"
- 3 Allen Keys
- NICE PACKAGING WITH WOODEN BOX
Bestseller No. 14
NEW MT3 Shank Lathe Tailstock Tap And Die Holder Set Sliding Floating Type
- This is a Quality Attachment for threading, tapping and reaming operation on your lathe machine
- Dies size holding capacity - 5/8",13/16", 1" , 1-5/16" & 1-1/2"
- BABY CHUCK ADAPTER 14 X 1.00 MM
- BABY CHUCK ADAPTER 14 X 1.00 MM
- YOU CAN USE CHUCK WITH TAP & DIE HOLDER
Bestseller No. 15
Tap And Die Holder Lathe Tailstock Inch Sliding Type Set (MT2)
- Versatile Lathe Accessory: This tap and die holder set is designed for use with a lathe tailstock, allowing for precise threading operations.
- Sliding Type Design: The holder features a sliding mechanism that enables easy adjustment and positioning of the tap or die.
- Inch Size Range: Compatible with inch-sized taps and dies, making it suitable for various threading applications.
- Durable Construction: Crafted from high-quality materials, ensuring long-lasting performance and reliability.
- Convenient Storage: The set comes with a handy case or container for organized storage and transportation.
Bestseller No. 16
Threading & Tapping attachment-lathe tailstock die holder set (MT1)
- Made of High Quality Tool Steel , this is a high quality product for your lathe machine
- Used for threading and tapping purpose on the lathe machine
- Die Holder Sizes 13/16", 1" & 1-1/2" . Tapping Capacity of the Tap Wrench : 1/16" to 1/4" & 1/4" to 1/2"
- Comes in precisely ground MT1 Shank, that goes inisde your lathe tailstock & intended job for threading / tapping is hold in rotating chuck.
- The Die for threading purpose is hold in the various Die holder sizes. The internal bore threading/ tapping is done by mounting the tap wrench head as...
Bestseller No. 17
Lathe Tailstock Tap & Die Holder Kit MT4 Shank Threading Tapping Set Wooden Box
- Lathe Tailstock Tap And Die Holder Sliding Type MT4 SHANK (does not include dies and taps
- 3 Die Holders -: 13/16" , 1" , 1-1/2"
- 2 Tap Chucks Holding Capacity -: 0 to 1/4" & 1/4" to 1/2"
- 3 Allen Keys
- NICE PACKAGING WITH WOODEN BOX
Bestseller No. 18
AI Lathe Tailstock Tap Die Holder Set Mt 3 - Complete Solution For Tapping Threading Reaming...
- Lathe Tailstock Sliding Tap Die Holder MT3 Shank - Tapping Threading Reaming Drilling - 3MT
- A Tail Stock Tap Die Holder Should Be Among The First Accessories a Machinist Makes For His Lathe, Since Threading With A Hand Held Die Stock...
- 3 Die Holders Are Interchangeable & Can Hold Die Sizes of 13/16" + 1" + 1-1/2".
- 3 Tap Holders Are Interchangeable & Can Hold Taps 0" to 1/4" + 1/4" to 1/2" + 1/2" to 3/4"
- EXCLUSIVE - TAP AND DIE HOLDER SET - OTHER SIZE MT1 AND MT2 IN OUR SHOP !
Bestseller No. 19
HHIP 3900-0293 Self Aligning Tap and Reamer Holder, 0-1/2"
- Base of guide has two 120 degree vies that accept round parts
- Supplied with 2 collets including one 0-#8 and one #10-1/2 inch
- New 4 jaw design provides firm grip and 90 degree alignment that eliminates tap breakage while producing perfectly aligned threads
- Country of origin: China
.