1,578 Reviews Scanned
Bestseller No. 1
4 Relay Normally Closed Pre Socket
- 12 40 amp 4-prong relays
- Relays and sockets are used for many car electronic applications to turn on/off almost any
- Heavy duty SPDT relays and sockets, normally closed,
- High 40A coil capacity- able to handle those high current applications with ease
- They are also used when a draws heavy amperage such as car alarms, remote starts, doors, trunk releases strobe lights, fog lights, stereos, fans, air...
Bestseller No. 2
40A Car Relay Harness Socket Heavy Duty SPDT Normally Closed Relay 4-PIN 12V
- Relays and sockets are used for many car electronic applications to turn on/off almost any device.
- They are also used when a device draws heavy amperage such as car alarms, remote starts, HID headlights, pop doors, trunk releases strobe lights, fog...
- High 40A coil capacity- able to handle those high current applications with ease
- Heavy duty SPDT relays and sockets, normally closed,
- 12 Volt 40 amp 4-prong relays
Bestseller No. 3
TWTADE/2PCS AC 110V Electromagnetic Power Coil Relay 10A 8 Pins 2DPT 2NO 2NC with Indicator Light...
- Product Name: Electromagnetic Relay;Model No.: YJ2N-LY;Socket Model No.: YJTF08A-E;Wiring description For example: 1,3,5 This contact, 3 and 5 are...
- Main Color: Grey;Indicator light: AC Coil: Red lamp,DC Coil: Green lamp;It can be seen whether the coil is energized.
- Coil Voltage: AC 110V;Contact Capacity: 10A 240VAC /28VDC.
- Type: DPDT(2NO 2NC); Pins: 8 Pin;Relay Size: 2.6 x 2 x 3.5cm / 1" x 0.8" x 1.4" (L*W*H); Socket Size: 7.7 x 2.4 x 2.7cm / 3.03" x 0.94" x 1" (L*W*H);...
- Package Content: 2 x Electromagnetic Relay + 2 x Socket + 2 x Base hook
Bestseller No. 4
DIANQI 1PC AC 110V-120V 8-Pin 5Amp Electromagnetic Power Relay DPDT 2NO+2NC Relay Coil with Socket...
- Product Name: Electromagnetic Relay; Coil Voltage : 110V AC; Contact Capacity: 5A 250VAC/28VDC
- Contact: Silver Alloy; Coil: Copper; Number of Terminals: 8
- With LED Indicator to judge the AC or DC coil, and judge if the coil is energized
- Wiring description: 1&4 are normally closed; 5&8 are normally open; 9&12 are common contacts; 13&14 are coil contacts
- Application: widely used in household air conditioner compressor motors, fan motors, cooling pump motors, starter relays for car starters, spur...
Bestseller No. 5
OONO DPST 1NO 1NC 8Amp Power Relay Module, AC/DC 12V Control Voltage
- Input control signal: Voltage AC or DC 12V, Current 33mA.
- Output switch DPST 1NO 1NC(Double Pole Single Throw, 1x Normally Open and 1x Normally Close ), rated current 8A/250VAC or 8A/30VDC (one switch).
- Compact plastic case and wires connects for easy mount. LED indication for relay action.
- This is a simple and practical passive relay module, which is very convenient to use. It can support both Normally Open and Normally Close. Two screw...
Bestseller No. 6
DPST 1NO 1NC 8 Amp Power Relay Module (AC 110V/115V/120V)
- This is a simple and practical passive relay module, which is very convenient to use. It can support both Normally Open and Normally Close.
- Input control signal: AC/DC 5V, AC/DC 12V, AC/DC24V, AC/DC48V, AC 115V, AC 230V Selectable.
- Output switch DPST 1NO 1NC(Double Pole Single Throw, 1x Normally Open and 1x Normally Close ), rated current 8A/250VAC or 8A/30VDC (one switch).
- LED indication for relay action.
- Compact ABS plastic case and wires connect for easy mount. Two screw mounting holes are convenient for you to fix it on the wall or wooden board. Of...
Bestseller No. 7
Electromagnetic Power Relay, 8-Pin 10 AMP 110V/120V AC Relay Coil with Socket Base, LED Indicator,...
- Electromagnetic relays are widely used: household air conditioner compressor motors, fan motors, cooling pump motors, starter relays for car starters,...
- Product Name: Electromagnetic Power Relay; Model: YJ2N-LY Type: DPDT; number of terminals: 8
- Coil voltage: 110V/120V AC; Contact capacity: 10A 240VAC
- Red mechanical indicatoe:It can intuitively judge whether the relay is attracted
- LED signal lamp : It can judge the AC or DC coil, and judge whether the coil is energized
Bestseller No. 8
Baomain Normally Closed AC Contactor AC 110V 25A 2 Pole 2NC BMR1-25/02 Circuit Control 35mm DIN Rail...
- Product Name:AC Contactor,Normally Closed
- Rated Coil Voltage:AC 110V;Rated Current:25A;Ui:500V;Ue:250V;AC-7a:25A
- Number of Poles:2;Material : Plastic, Electronic Parts
- Overall Size(Approx.) : 82 x 18 x 69mm / 3.2" x 0.7" x 2.7"(L*W*T);
- Weight : 125g;Package Content : 1 x AC Contactor
Bestseller No. 9
TWTADE/JQX-12F-2Z AC 110V Coil Voltage 30A DPDT 2NO+2NC General Purpose High Power Relay 8 Pin...
- Product Name : Power Relay;Model : JQX-12F-2Z; Contact : DPDT 2NO+2NC
- Wiring description For example: 1,3,5 This contact, 3 and 5 are normally open, 1 and 5 are normally closed;Pin Number : 8; Coil Voltage : AC 11OV;...
- Body Size(not included pin) : 3.5 x 3.3 x 4cm / 1.4" x 1.3" x 1.6" (L * W * T);Total Height : 4.8cm / 1.6";Installing Hole Size : 0.48 x 0.35cm /...
- Installing Hole Distance(center) : 3.85 x 3.78cm / 1.52" x 1.49"(L*W);Material : Plastic, Metal;Color : See the Picture
- Weight : 93g;Package Content : 1 x Power Relay
Bestseller No. 10
Baomain Normally Closed AC Contactor HC1-63/02 AC 110V 63A 2 Pole 2NC Universal Circuit Control DIN...
- Rating: AC 110V~120V, 63A;50/60Hz
- Ue: 250V
- 2 Poles
- Mounting Type: 35mm DIN Rail Mount
- Overall Size: 82 x 36 x 62mm / 3.4" x 1.4" x 2.4"(L*W*T); Weight: 226g
Bestseller No. 11
AEDIKO 4pcs DC 12V Relay Module 1 Channel Relay Board with Optocoupler Isolation Support High or Low...
- 12V Relay Module: Working Voltage: DC 12V; Maximum Load: AC 250V/10A, DC 30V/10A; Trigger Current of Opto-Isolator: 5mA
- Fault-Tolerant Design: Fault Tolerant Design, Even if the Control Line is Broken, the Relay will not Operate;All Interfaces of Relay can be Wired Out...
- Optocoupler Isolation:1 Channel Relay Board use Optocoupler Isolation that has Strong Driving Ability and Stable Performance ,The Isolation Circuit...
- Jumper Design: The Relay Module has a Jumper That You Can Set Rather the Unit State Changes with High or Low Signal. Has Screw Terminals for Relay...
- Wide Application: DC 12V Relay Module Works Well with ARM /PIC /AVR /MCU/Raspberry/CNC Machine/ PS4 etc.
Bestseller No. 12
DPST 1NO 1NC 8Amp Latching Relay Module (DC 12V)
- If you are looking for a latching relay with power-off memory, then this module will be very suitable for you. Even if the power supply is turned off,...
- This is a simple and practical latching relay module, which is very convenient to use. It can support both Normally Open and Normally Close. Two screw...
- Support three input control modes: 1, Use Set and Reset buttons on the module(No external control switch or signal is required). 2, External Set and...
- Operating voltage version: DC 5V, 12V and 24V three versions selectable. Output switch DPST 1NO 1NC(Double Pole Single Throw, 1x Normally Open and 1x...
Bestseller No. 13
mxuteuk 2pcs AC 110V/120V Coil 8 Pin 10A DPDT LED Indicator Electromagnetic Power Relay General...
- Product Name:Electromagnetic Power Relay;
- Relay Model : JQX-13FL; Type : DPDT(2NO 2NC); Number of Terminals : 8 ;
- Coil Voltage:AC 110V; Contact Capacity: 10A 6V-380VAC/10A 6V-220VDC;
- Overall size(approx. ): 86 x 56 x 28mm/ 3.39 x 2.2 x 1.1 inches(L*w*h);
- Package Content : 2pcs x Power Relay + 16pcs x Terminals
Bestseller No. 14
QitinDasen 5 Pieces 4 Pin Car Relay, 24V 40A SPST Automotive Relay with Metal Mounting Bracket, for...
- Professional 4 pin automotive relay with SPST design (Single Pole Single Throw), suitable for normally closed or normally open circuits.
- The relay has high contact voltage, large coil capacity and high sensitivity, and can easily handle high current applications.
- Comes with free metal mounting bracket for easy installation and fixing.
- Suits for all automobiles and devices equipped with a 12V/24V DC power source. Greatly used for car lights, Indicator light, fog lamps, wiper, central...
- If you have any questions about the products you ordered, please contact us in time, we will try our best to provide you with satisfactory service. We...
Bestseller No. 15
DPST 1NO 1NC 8Amp Power Relay Module, Briidea 24V AC/DC Power Relay Control Voltage, White
- INPUT CONTROL SIGNAL: Voltage AC or DC 24V, Current 17mA.
- OUTPUT CURRENT: Output switch DPST 1NO 1NC(Double Pole Single Throw, 1 Normally Open and 1 Normally Close ), rated current 8A/250VAC or 8A/30VDC (one...
- SIMPLE & PRACTICAL: This passive power relay module is simple and practical, which is very convenient to use. It can support both Normally Open and...
- EASY MOUNT: The power relay is of compact plastic case and wires connects for easy mount. Two screw mounting holes are convenient for you to fix it on...
- LED INDICATION: This power relay has a led indicator for relay action indication. It is obvious to know the status of the switch at a glance.
Bestseller No. 16
Ulincos Auto Relay U1914 with 14AWG Wire Harness, 12V DC 30/40A SPDT 5-Pin (Pack of 2)
- SPDT Relay - Single Pole Double Throw, you can use them to open or close a circuit -- or go from bright to dim on your headlights
- 30/40A Relay – It is rated to handle 40 amps of load at 12V DC in the Normally Open position (PIN 87), and 30 amps of load at 12V DC in the Normally...
- With the Wire Harness - Makes relay installation a breeze. If one goes bad, just unplug it from the socket and plug in a new one
- Each socket has a male and female slide. You can connect as many of these together next to each other as possible. This makes mounting them easy and...
- Wide range of use, can be used in automotive setup, seat warming, vehicle lighting system, car sound system and various other applications
SaleBestseller No. 17
TWTADE/JTX-2C, MK2P-I DPDT Power Relay with Plug-in Terminal Socket Base, AC 110V Coil, 8 Pin 2NO...
- Product Name: Electromagnetic Relay; Coil Voltage: AC110V; Model : JTX-2C;
- Wiring description For example: 2,3,4 This contact, 3 and 2 are normally open, 3 and 4 are normally closed. Contact: DPDT 2NO 2NC; Number of Pins: 8
- Contact Capacity: 250VAC/28VDC 10A RES; 250VAC 7A GEN
- Total Size (Approx. ): 34 x 34 x 67mm/ 1. 4" x 1. 4" x 2. 6" (L*W*H); Socket Size: 5. 5 x 4 x 2. 1cm/2. 2" x 1. 6" x 0. 86"(L*W*T)
- Weight: 104g; Package Content: 1 x Electromagnetic Relay
Bestseller No. 18
Supco 90382 General Purpose Fan Relay, 18 A Load Current, 120 V Coil Voltage, Normally Open and...
- Electric relay for receiving and controlling electric signals
- Controls signals for a fan
- SPST-NO, SPST-NC, SPDT 1 NO/1 NC contact forms
- Sealed enclosure
Bestseller No. 19
Ximimark 5Sets DC 12V Coil Power Relay LY2NJ HH62P JQX-13F DPDT 8 Pin 10A With Socket Base
- It is used for automatic line regulation, safety protection, conversion circuit, etc. It is suitable for various places such as workshops, factories,...
- Coil voltage: DC12V，Coil Power: DC (W) ≤0.9,AC (VA): ≤1.2
- Contact Structure: 8 pins 2 normally open 2 normally closed，Contact capacity: 10A 250VAC
- Pull-in voltage: ≤80% (V)，Release voltage: DC: ≥10% (V), AC: ≥30%
- Contact resistance: ≤50 (mΩ)，Insulation resistance: ≤100 (mΩ)
Bestseller No. 20
Baomain AC Contactor CJX2-1801 110V Coil 3P 3 Pole 660V 25A 1NC(1 Normally Closed)
- Rated Coil Voltage: AC 110V; Frequency: 50 Hz
- Contact Type: 1NC; Pole Number: 3 Pole; Conventional Thermal Current(Ith): 25A
- Rated Insulation Voltage(Ui): AC 660V; AC-3 Rated Voltage(Ue): 220/380V
- Total Size(Approx): 79 x 44 x 71mm/ 3.1" x 1.7" x 2.8" (L*W*H)
- Net Weight: 364g; Rail Mounting: 35mm DIN Rail
.