3,114 Reviews Scanned
- Suit for Raspberry Pi Model 2B. Support:DMR,YSF, D-STAR, P25. Support both Simplex and Duplex mode.
- Frequency: Support 430~450Mhz, UHF
- Two Time Slots: Support receive in one Frequency and transfer in another frequency.
- Upgraded Network: Support two networking methods, support wifi wireless connection and wired connection to the router directly.
- Power Supply: 5V, Mobile charger or a USB cable connected to your computer or laptop.
- MMDVM hotspot supports D-STAR DMR YSF P25 NXDN POCSAG, enables the different mode of digital two way radio to communicate with each other (YSF2DMR /...
- HOTSPOT size: 2.8 x 1.3 x 0.9” inch
- Setup: Set the same freq as Radio Mobile, for example: 433.550000MHZ. DMR WIFI SSID:pi-star,PASSWORD:raspberry. Need the 2.4GHz SSID as the Pi Zero W....
- Power Supply: Mobile charger or a USB cable connected to your computer or laptop.
- Best customer services: fully-assembled. The firmware is pre-loaded. Contact us if any question, we will reply within 6 hours. 73
- MMDVM hotspot supports D-STAR DMR YSF P25 NXDN POCSAG, enables the different mode of digital two way radio to communicate with each other (YSF2DMR /...
- Upgraded hardware: the raspberry pi Model 2B support wired connection to the router directly and the wifi module support connecting wifi in wireless...
- Power Supply: 5V, Mobile charger or a USB cable connected to your computer or laptop.
- Best customer services: fully-assembled. The new4.1.5 firmware is pre-loaded. Contact us if any question, we will reply within 6 hours. 73.
- [Firmware 4.1.5] In the latest batches shipped to Amazon warehouse, the problem has been solved, we have preload the firmware 4.1.5. If you receive a...
- [EASY SET UP] Preload sofeware Pi-Star on TF card, no need to download again. Radio Frequency: (UHF:430-440) This is upgraded version, do not need to...
- [WIFI SSID] Need the 2.4GHz SSID as the Pi Zero W doesn't support 5.8GHz.and WiFi will not work with WEP, make sure your WiFi Password Type is WPA....
- [EASY CHARGING] Free micro USB charging cable included, charged with power bank or connect to laptop or computer. The Hotspot will also work mobile in...
- [NOTE] If you encounter that the device cannot connect to network after setup, please email us, we will address your issue asap. Not compatible with...
- MMDVM hotspot supports D-STAR DMR YSF P25 NXDN POCSAG, enables the different mode of digital two way radio to communicate with each other (YSF2DMR /...
- Two Time Slots: Support receive in one Frequency and transfer in another frequency using Duplex mode
- Upgraded Network: support wifi wireless connection and wired connection to the router directly.
- Power Supply: 5V, Mobile charger or a USB cable connected to your computer or laptop.
- Best customer services: fully-assembled. The firmware is pre-loaded. Contact us if any question, we will reply within 6 hours. 73
- [NEW MMDVM Nano Hotspot] Connecting Python Programmable NanoHat OLED to NanoPi NEO, the Nano Hotspot module is created to run Ubuntu and other useful...
- [HOST BOARD] The NanoPi NEO is another fun board developed by FriendlyARM for makers, hobbyists and fans; CPU: Allwinner H3, Quad-core Cortex-A7 Up to...
- [PCB BOARD] NanoHat OLED is a small and cute monochrome OLED module with low power consumption with 433MHz Ceramic antenna. It is 0.96" resolution...
- [Tiny but [Easy to Start] Power up the MMDVM Nano hotspot module with MicroUSB, connect RJ45 with Router, connect Router with computer and open...
- ✔➸ Added external inductor. Support VHF communication, the effect cannot reach the perfect effect of UHF
- ✔➸ MMDVM hotspot is a fully-assembled device.
- ✔➸ HOTSPOT comes pre-configured for a Wi-Fi network. SSID: Pi-Star (or Pi-Star-Setup) Password: raspberry, Just connect to temporarily WIFI:...
- ✔➸ HOTSPOT size: 2.8 x 1.3 x 0.9” inch
- APPLICABLE MODEL: MMDVM mini hotspot repeater board, duplex dual time slot design, mainly used for the built in extension board for Raspberry Pi 3B.
- WITH COOLING FAN: The hotspot board has mini cooling fan for easy operation for long periods of time, and the acrylic case adds elegance to the...
- MEMORY CARD: Including 16G or 8G small memory card, the writing speed is not less than 10M, which has high efficiency and good durability.
- GOOD PERFORMANCE: The digital hotspot board has the advantages of optimized wiring, perfect component layout, low heat generation, fast heat...
- DMR STANDARD: All debugging parameters are carefully debugged according to the DMR standard, more stable in use and greatly improve the sound...
- Suit for Raspberry Pi Zero W. Support:DMR,D-STAR, P25 and work with UHF in duplex mode. In Simplex mode support both Uhf and Vhf
- Basic Setup: Set the same freq as Radio Mobile, for example: 433.550000MHZ DMR, WIFI SSID:pi-star,PASSWORD:raspberry, Need the 2.4GHz SSID as the Pi...
- Two Time Slots; Support receive in one Frequency and transfer in another frequency.
- Power Supply: Mobile charger or a USB cable connected to your computer or laptop. The Hotspot will also work mobile in your vehicle if you Tether it...
- Best customer service: feel free to contact us,we will reply within 6 hours
- Support PI STAR's web based digital voice dashboard and configuration tool.
- Support all four digital amateur modes DMR, D Star, P25 and System Fusion.
- Built in OLED system status display indicating Mode,Talk Group and Call Sign.
- Built in LED indicators for status of Power, PTT, COS and Mode.
- Console port SSH 22 for root level access to the operating system.
- 1. Suit for Raspberry Pi 3,Raspberry Pi Zero W. Support:D-STAR, P25, DMR and work with UHF. In Single mode support both Uhf and Vhf
- 2.Basic Setup: Set the same freq as Radio Mobile, for example: 433.550000MHZ DMR in simplex mode. If select duplex mode,set Tx and Rx reverse to the...
- 3. This product is a professional equipment. You need to apply for a call sign and ID number when using this product. Please consult the local radio...
- 4. Power Supply: Mobile charger or a USB cable connected to your computer or laptop. The Hotspot will also work mobile in your vehicle if you Tether...
- 5. Best customer service: feel free to contact us,we will reply soon within 12 hours.
- Suit for Raspberry Pi Zero W. Support:DMR,D-STAR, P25 and work with UHF in duplex mode. In Simplex mode support both Uhf and Vhf
- Basic Setup: Set the same freq as Radio Mobile, for example: 433.550000MHZ DMR, WIFI SSID:pi-star,PASSWORD:raspberry, Need the 2.4GHz SSID as the Pi...
- Power Supply: Mobile charger or a USB cable connected to your computer or laptop. The Hotspot will also work mobile in your vehicle if you Tether it...
- Support receive in one Frequency and tranfer in another Frequency.
- Best customer service: feel free to contact us,we will reply soon within 24 hours.
- MMDVM Hotspot USB HAT Board is a substitution for Raspberry pi and a bridge to build a multi-mode digital voice modem with CH340 driver, the driver...
- MMDVM Simplex hotspot board is a DMR transcoding board and a connection to annalog voice and digital mode. supports UHF VHF, frequency range:...
- MMDVM Hotspot is an easy, convenient and ready to use Multi-mode Hotspot that supports C4FM YSF NXDN DSTAR P25 DMR; Support Bluedv: USB Hat board...
- Muliti Functions: MMDVM Board supports mmdvmhost/mmdvmcal on linux/windows to test the mmdvm hat BER/DMR/TX check TCXO offset | BER XX% ; MMDVM_HS...
- IMPORTANT NOTE: When you first time set up, MMDVM hotspot will generete pi-star set up hotspot, which you'll connect with, and goes into pi-star and...
- [Firmware 4.1.5] In the latest batches shipped to Amazon warehouse, the problem has been solved, we have preload the firmware 4.1.5. If you receive a...
- [WIFI SSID] Need the 2.4GHz SSID as the Pi Zero W doesn't support 5.8GHz.and WiFi will not work with WEP, make sure your WiFi Password Type is WPA....
- [EASY SET UP] Preload sofeware Pi-Star on TF card, no need to download again. Radio Frequency: (UHF:430-440,VHF:144-146) This is upgraded version, do...
- [EASY CHARGING] Free micro USB charging cable included, charged with power bank or connect to laptop or computer. The Hotspot will also work mobile in...
- [NOTE] Not compatible with Baofeng UV-5R, Baofeng RD-5R, 5X, 5R+, 5R Plus, etc UV series, BF series. More product setup guide, please read the product...
- 10W/5W/2.5W/1W Selectable: It is a powerful handheld radio with a compact design, featuring high-low quad-power selectable among 10W/5W/2.5W/1W and...
- UHF Dual Mode Radio: You can switch between analog and digital (DMR Tier I & Tier II) operation modes at any time. Works well with hotspot, allows...
- Talker Alias Function: This function, also known as In-band Caller Alias, will allow your pre-set text like your name or callsign displayed on all...
- Large Battery & Crystal Sound: Come with a 3100mAh large battery, the Radioddity GD-AT10G support 14 hours of continuous working time and 90 hours of...
- Our programming software for the Radioddity GD-AT10G has been successfully tested to run under Windows 11 as well.
- DMR Tier 1 & 2 Compatible, MOTOTRBO Compatible, Roaming, Talker Alias, Analog and Digital APRS (TX & RX), BTECH is proud to be in the USA, which...
- The DMR-6X2 Allows for Front Panel Programmable Channels, but for advanced features software programming is recommended (Programming Cable Included),...
- Exclusive BTECH Firmware (Designed in the USA), Dual Slot DMR Radio (Tier 1 and Tier 2 Compliant); 4000 Channels, 250 Zones (Up to 250 Channels Per...
- K1 Accessory Jack (QHM22 Speaker Mic Compatible), SMA-Female Antenna (Compatible with Nagoya SMA-Female Antennas)
- What's in the Box: DMR-6X2 PRO, Bluetooth PTT, 3100 mAh High Capacity battery, 1 Belt Clips, Programming Cable, Charger Base, Charger Transformer,...
- MMDVM hotspot supports UHF VHF, frequency range: 144MHz-148MHz, 420MHz-475MHz, 842MHz-950MHz (depending on ADF7021 and TCXO, HAT firmware amateur...
- AURSINC hotspot board supports Raspberry Pi 3B, 3B +, Pi ZERO, compatible with NanoPi NEO, Orange Pi, compatible with BlueDV (requires USBtoTTL or...
- Hotspot board saves electricity, High quality TCXO, stable, low BER. Support MMDVM mode DMR / YSF / P25 / NXDN / DSTAR / POCSAG. Support online...
- If the Raspberry fails to connect the hotspot board, please try update the firmware of the hotspot board by conducting the command: sudo...
- Compatible with P4 settings:since our mmdvm board is defautly setup for Pi-Zero W, Pi 3. and if you do want to connect it with your Pi 4, you could...
- if the board fails to work on duplex mode, please run the upgrade command: sudo pistar-mmdvmhshatflash hs_dual_hat ; HIGH PERFORMACE: 32-bit ARM...
- WIDELY COMPATIBLE: Supports DMR, P-25, D-Star and System Fusion
- WORK with RASBERRY Pi: Mounts cleanly on current Raspberry Pi including the Pi Zero , NOT compatible with Rasberry Pi 4.
- FREQUENCY: Radio Frequency : Freq:144-148,219-225, (Main Band) 420-475,842-950 NOTE: TX =0, RX=0. Modem select: STM32-DVM/MMDVM_HS-Raspberry pi...
- Update new FW: (pi-star / expert / ssh access / user :pi-star pass:raspberry) then run sudo pistar-mmdvmhshatflash hs_dual_hat set Jumper...
- if the board fails to work on duplex mode, please run the upgrade command: sudo pistar-mmdvmhshatflash hs_dual_hat ; HIGH PERFORMACE: 32-bit ARM...
- WIDELY COMPATIBLE: Supports DMR, P-25, D-Star and System Fusion
- WORK with RASBERRY Pi: Mounts cleanly on current Raspberry Pi including the Pi Zero , NOT compatible with Rasberry Pi 4.
- EASY OPERATION: The firmware is pre-loaded and is easily upgraded via software. Onboard LEDs showing status (Tx,Rx,PTT,Mode)
- FREQUENCY: UHF 433-900MHz, VHF 144-220 MHz. NOTE: TX =0, RX=0. Modem select: STM32_HS_GPIO ; To leave the screen on all the time In Pi-Star...
- HIGH PERFORMACE: 32-bit ARM processor, up to 10mW RF power, fully tested every piece.
- WIDELY COMPATIBLE: Supports DMR, P-25, D-Star and System Fusion
- WORK with RASBERRY Pi: Mounts cleanly on current Raspberry Pi including the Pi Zero , NOT compatible with Rasberry Pi 4.
- FREQUENCY: Radio Frequency : Freq:144-148,219-225, (Main Band) 420-475,842-950 NOTE: TX =0, RX=0. Modem select: STM32-DVM/MMDVM_HS-Raspberry pi...
- Update new FW: (pi-star / expert / ssh access / user :pi-star pass:raspberry) then run sudo pistar-mmdvmhshatflash hs_dual_hat set Jumper...
FAQ:
Q: How far does a DMR hotspot reach?
A: I put a Diamond SRH-320A antenna on my DMR hotspot and placed it near a window around 35-40 feet in the air and tested just how far my hotspot would reach to my AnyTone 878 HT. Here are the results: YouTube. K0LWC. 14.1K subscribers.
Q: How does a DMR hotspot work?
A: How does a DMR hotspot work? A hotspot, simply put, is your internet gateway to a particular DMR network. You would use a hotspot when you either don’t have a DMR repeater nearby, or simply don’t want to tie it up for any length of time. This is a very common hotspot configuration and one that really sets the base for understanding how they …
Q: What is the range of a DMR hotspot?
A: Internet Connectivity. First of all,you need to consider whether you want an Ethernet-only or a Wi-Fi connectivity hotspot. Transcoding Capabilities. Secondly,you need to consider the transcoding abilities. … Included Screen. The thirds thing to consider while buying a DMR hotspot must be its screen. … Radio Input. …
Q: How to use DMR effectively?
A: DMR repeaters have 2 “time slots” that share a frequency, allowing for two separate, simultaneous conversations This means one repeater can do the work of two while using less bandwidth than a single analog repeater You must know which Repeater Slot you wish to use in order to set up your radio (more on this later)