2,625 (rnd) Reviews Scanned
No products found.
No products found.
FAQ:
Q: How to setup a direct throttle for a predator 212?
A: Remove the air box assembly,and remove the tube from the gas tank. Remove with a 10mm socket the two nuts holding the air box assembly on. … Now ready to prep the stock linkage for the upgraded kit. … Remove the top two bolts (8mm socket) on the recoil housing,discard the washers. … Install the cable through the fitting and into the aluminum cable clamp. …
Q: What kind of oil goes in a predator 212?
A: Similarly, you may ask, what kind of oil goes in a Predator 212? SAE 10W-30 oil is recommended for general use. Similarly, is 10w30 better than 5w30? 5w30 is used for light-duty engines while 10w30 is used for engines which carry heavier loads. 10w30 provides sealing action in the engine due to the fact that it is thicker than 5w30 engine oil. Thinner at lower temperatures.
Q: How to install a 212cc clutch?
A: Thread the jam nut onto the bolt approximately 3/4 on an inch. Now install the band onto the threaded portion of the bolt. Continue threading the bolt into the jam nut until you have enough threads coming through the band to start the second jam nut. 3) You can now start the bolt into the riv-nut and thread in until it’s flush.
Q: What is a 212 predator engine?
A: Predator engines have been quite popular and have received excellent reviews for great performance while being inexpensive. The Predator 212cc Horizontal Shaft Gas Engine is the perfect workhorse and can be used as a replacement engine for compressors, water pumps, lawn mowers, log splitters, pressure washers, small boats, cement mixers and several other machines.