1,847 Reviews Scanned
- MATERIAL - Made from aluminum 1-piece clamp halves that have the rail formed into the clamp
- PROFILE - Super low profile at about a 1/2" away from the barrel with a curved, 3 slot rail that reduces hang ups and snags
- EASY TO MOUNT - It only uses 2 bolts that correlate the 2 halves to reduce incorrect mounting
- INSTALLATION- It fits within a 1.25" space on your magazine tube and includes no slip grip pads and a wrench
- FITS - Remington 870, 1100, 1187; Benelli (except SuperNova); Mossberg 500, 590; Winchester 1300, 1200 and SXP Defender
- 1. CNC manufacturing aluminum Anodized finish extension pipe clamps connection adapter
- 2. The contact surface between the fixture and the extension tube is protected by rubber pads to prevent damage to your tube
- 3. The surface of the fixture can be installed with rails.Stable shooting
- 4. Easy to install - it only uses 2 bolts to connect the two halves, making it easy to operate
- 5. Equipped with corresponding bolts and wrenches internally. If you have any questions, please contact us first
- MATERIAL - Made from aluminum 1-piece clamp halves that have the rail formed into the clamp
- PROFILE - Super low profile at about a 1/2" away from the barrel with a curved, 3 slot rail that reduces hang ups and snags
- EASY TO MOUNT - It only uses 2 bolts that correlate the 2 halves to reduce incorrect mounting
- INSTALLATION- It fits within a 1.25" space on your magazine tube and includes no slip grip pads and a wrench
- FITS - Remington 870, 1100, 1187; Benelli (except SuperNova); Mossberg 500, 590; Winchester 1300, 1200 and SXP Defender
- Sling attachment point for the Remington 870 and Mossberg 500/590/Maverick series of shotguns; Clamps onto the barrel and extended mag tube
- Can be configured for use with either Push-Button QD Sling Swivels or clip-in style attachments such as the MS3 Paraclip, the HK hook, ITW MASH hook,...
- Made from precision cast steel that is Melonite treated for wear and corrosion resistance
- Dedicated fit for the Remington 870 and Mossberg 500, 590, and Maverick shotguns with an extended mag tube
- Made in USA
- Anodized aircraft-grade aluminum; water and impact-resistant
- Accessory rail system for mounting additional accessories (18mm x 24mm)
- Accommodates barrel and scope diameters from 20mm to 32.5mm
- Protective rubber inserts protect your gun and accessories when mounting
- No tools required
- Strong and lightweight
- Provides additional support for extended magazine tubes
- Designed specifically for the gg&g magazine tubes that have a relief cut. Will not properly fit any other magazine tubes
- Held in place by counter pressure steel socket head cap screws
- All edges have been deburred and softened to protect the shooter
- Detachable sling swivel mount compatible with most standard length shotguns
- Includes spacing pads for fitment to any shotgun with full length barrel and magazine tube; Not compatible with the Mossberg Shockwave or shotguns...
- Sling mount functions as a modular attachment point for your sling and can be attached and removed instantly from the base via the push button quick...
- Constructed from lightweight 6061 grade aluminum
- All Monstrum Tactical mount and accessory products come with a lifetime guarantee
- Mossberg bbl clamp 12Ga
- High quality product
- Highly durable product
- This product is manufactured in United States
- Highly Functional:Allow top rail mounting accessory Picatinny and Weaver tactical style, such as rifle scopes, flashlights, lasers, sights ring
- Two-piece Clamping Barrel Design:The smart two-pieces design for clamping rifle tube could adjust the compatible diameter range: from 17mm to 30mm...
- High Quality:High strength aircraft aluminum alloy with anodized black matte finish.
- Lightweight :Lightweight, mounts light or laser scope sight, securely and no any wiggle.
- Easy to Install:It allows a uniform and secure clamping pressure and an integral accessory rail. At the same time it provides elastic tension
- The BEAMSHOT RF9 mount Creates a standard 1913 picatinny rail system on bull barrel long guns.
- Included in the RF9 kit are 4 different size spacers.
- Fits on many round barrel type firearms; Ideally suited for 12, 16 or 20 gauge shotgun, or attach to many bull barrel with an outer diameter of 20-24...
- Makes it easy to mount Beamshot laser sights, tactical flashlights and other types of accessories on your firearms.
- Noted: Some pump action shotgun may have limited free space to cause unmountable.
- Barrel/scope clamp ring with picatinny rail top and adapter reducer spacer shim, fits 1 inch and 30mm scope/barrel.
- 4 slots 20mm standard picatinny weaver rail on top for laser sight,red dot or flashlight.
- 2 clamp screw on each side to ensure the mount more secure.
- Made of high strength aircraft aluminum alloy,solid and sturdy,item size: 1.77"L x 1.72''W x 1.70''H, item weight:1.38Oz/1 pcs.
- If it's still loose after installation, you can try wrapping several layers of electrical tape around the tube. This should resolve the issue and...
- Fit rifle barrel from 0.66 inch to 1 inch.
- Allow for the mounting of Picatinny or Weaver standard flashlights, red dots, laser sights.
- Lightweight, made of aluminum with black color anodized matte finish.
- Top rail is Standard Picatinny Rail.
- Package Included: Mount, Hex wrench.
- A fast and easy solution for mounting on the barrel.
- Designed to install a torch or laser onto the tube/shot
- Made from aluminum alloy.
- Package Include: 2 x Rings, 2 x Wrench
- Ideal for flashlights and lasers.
- Ideal for flashlights and lasers.
- Made of durable glass and nylon composite.
- It connects to the tactical lights on the shotgun .
- It can be used to attach a swivel-sling to some shotguns.
- Smart 2-piece design, easy installation, fit around the front view housing
- Smart 2-piece design, easy installation, fit around the front view housing
- Designed to m-o-u-n-t flashlight, laser, hand-guns, rifles, and shotgun
- Ring designed to install flashlight / laser, thumb nut allows for quick installation.
- The lightweight single r-a-i-l bracket is easy to install without any armory.
- 【Flexible Size】Size: 76mm length,20mm width, The central distance is about 50 mm, Fit for 12~40mm diameter barrel. gun scope
- 【Widely Usage】Good for airsoft Rifle, Shotgun, Paintballgun, Airsoft, Crossbows, Torches, Flashlight, Telescopes, Sights ,Bicycles, Hunting...
- 【High quality Material】This gun/airsoft rifles scope mount uses multiple stamping bending forming processes, quality steel surfaces after...
- 【Easy Use】The scope riser mount is convenient and easier install and remove with big screew bar and easy-to-rotate knobs.
- 【Friendly Protect】Anti-vibration design ,build in sponge for protect your barrel for scratch. shotgun light with mount
- Made using the highest quality materials
- Tested for durability
- Designed to be safe and unique
- Fit specific to Mossberg 590A1.
- Function: Designed to provide a secure hold on barrels while in a vise
- Wide Applicability: 4 Openings accommodate round tube or barrel .550" / .625" / .750" / .825" to .920"
- Soft Lining: equipped with EPDM lining to protect the barrel.
- Durable Material: constructed from aircraft grade aluminum
- Updated Reversible Structure
FAQ:
Q: What is a GG&G barrel clamp?
A: The GG&G barrel clamp is designed specifically for the GG&G Magazine Tube and will not properly fit any other mag tubes. Strong and lightweight. Provides additional support for extended magazine tubes. Designed specifically for the GG&G magazine tubes that have a relief cut.
Q: Will the Remington 870 barrel clamp fit any shotgun?
A: IMPORTANT: The Barrel Clamp For The Remington 870 Shotgun Will Only Fit Remington 870 12ga Shotguns In Current Production From The Factory. IMPORTANT NOTICE: The GG&G Barrel Clamp makes contact with your barrel and the GG&G Magazine Tube Extension. This contact may damage/wear the finish on your barrel or mag tube during usage.
Q: Can I tape the inside of the barrel clamp?
A: It is not advised to apply any tape to the inside of the barrel clamp that makes contact with the Mag Tube Extension. Since GG&G Inc. cannot control the installation of this product, GG&G will not be responsible for any wear, blemishes, marks or damage that may occur to your shotgun.