3,107 Reviews Scanned
Bestseller No. 1
Costar Style Plate-Mounted Costar Stabilizers Balancing Pole Raised Wire 6.25u 2u for MX Mechanical...
- Kit 1 is 1x6.25+4x2u Set which can be used for GH60 87 Tenkeyless Keyboard
- Kit 2 is 1x6.25+7x2u Set which is used for 96 104
- 6.25u wire is 4.21 inch,2u wire is 1.18 inch
- Raised wire is better tactile feeling than flat wire
Bestseller No. 2
Centercue Costar Stabilizer Set for Mechanical Keyboards 2u 6.25u
- Stabilizers for Costar compatible keyboards
- 4x 2u and 1x 6.25u stabilizers included
- Replace stabilizers on your existing keyboard or use them when building a new keyboard
Bestseller No. 3
luosh Plate-Mounted Costar Stabilizers Balancing Pole 6.25u 2u for Keyboard Big Key
- Costar stabilizer kit are a littler harder than Cherry style stabilizer kit ,however the clicking sense is better as usual,especially for Spacebar.
- All our GH60 Kit HHKB Kit are using this stabilizers,so just feel free to use it.
- Material:Plastic
- 2u set is a 2u metal wire and 4 plastic part （2 big and 2 small）which can be used for big key
- 6 25u set is a 6 25u metal wire and 4 plastic part （2 big and 2 small）which can be used for Space
SaleBestseller No. 4
DUROCK V2 Screw-in Stabilizers, 7U, 6.25U, 2U Clear PCB Mount Stabilizer Pre-Clipped, Wire Popping...
- DUROCK V2 Stabilizers are PCB mount screw-in Stabs that feature a patent design and precision upgrade models to avoid wire drop out.
- The V2 Stabs Stem / Sliders are pre-clipped design, do not require any clipping for fast & easy set up.
- Well selected Premium Polymer Nylon housings, all the Stainless Steel Wires and hardware are sourced from Korea and with real gold coating.
- Clear V2 housings and the Gold-plated Wires set gives your board a clear and golden edge.
- DUROCK Stabilizers V2 Compatible with PCBs that use "screw-in" or "PCB Mount" stabilizers. ( Washers, both 6.25u and 7u Spacebar Wire included )
Bestseller No. 5
ANSI Costar Stabilizers Anodized Aluminum Positioning Board Plate Support for GH60 60% Keyboard DIY...
- Package:ANSI Aluminum Plate For GH60 Poker Layout
- The plate is sand blast and then anodized,Cherry plate mounted stabilizers does't support
- This plate can use costar stabilizers as well as Cherry PCB stabilizers.1x6.25u + 4x2u is enough.
- This plate is compatible with GH60 case PCB,such as DZ60 Satan XD60 YD60 etc
Bestseller No. 6
Genuine Cherry PCB Snap-in Stabilizers (60%/TKL)
- Genuine Cherry PCB Snap-In stabilizers
- Multi Layout
- Stainless steel Wires
Bestseller No. 7
Universal Anodized Aluminum Plate Positioning Board Plate for GH60 60% Keyboard DIY Support Costar...
- The plate is sand blast and then anodized,Cherry plate mounted stabilizers doesn't support
- This plate can use costar stabilizers as well as Cherry PCB stabilizers.
- This is the link only for keyboard Plate,no keyboard included.
- This plate is compatible with PCB stabilizers and can support almost all GH60 layout.
- Left shift ight shift nter backspace all can be splited.
Bestseller No. 8
Snap-in Stabilizers Plate Mounted Mechanical Keyboard Customized Repair Plate Stabilizer 2U/6.25U...
- Designed for MX-compatible Plate, the satellite axis is fixed on the positioning board, not on the PCB main board.
- Made of POM material, smoother than ordinary materials.
- The gold-plated stainless steel wire have high hardness and strong oxidation resistance.
- Key Position: delete key (2u), enter key (2u), left and right Shift (2u), space key (6.25u).
- Products Include: 2u x 4 sets , 6.25u x 1 set. PCB satellite axis is specially designed to be compatible with MX, suitable for 61 /64 /68 /84...
SaleBestseller No. 9
120pcs/Pack Mechanical Keyboard PCB Stabilizer Satellite Switch Film PTFE/Silica Gel Adjust The Big...
- 【Material】Sporon material.
- 【Packing】24 pieces of 0.2mm movable bottom pads, 48 pieces of 0.3mm movable bottom pads, 24 pieces of 0.8mm steel wire spacers, 24 pieces of...
- 【How to use】Remove the 3M or transparent PC anti-sticking layer first, and then separate each rubber pad.
- 【Suitable for】 PCB satellite shaft structure PCB mechanical keyboard with all the configuration
- 【Warm Tips】Please follow the instructions, otherwise the product will be separated or twisted.
Bestseller No. 10
STABILicers Maxx 2 Heavy-Duty Traction Cleats for Job Safety in Ice and Snow,Large (1 Pair)
- Adjustable Sure-Fit binding system includes a series of hook-and-loop straps that securely fasten to any boot or shoe from heel to toe, and hold...
Bestseller No. 11
Aluminum Positioning Board for GH60, Splited Plate 60% Keyboard DIY Support Costar Stabilizers...
- This plate is compatible with PCB stabilizers and can support almost all GH60 layout.
- This is the link only for keyboard Plate,no keyboard included.
- The plate is sand blast and then anodized,Cherry plate mounted stabilizers doesn't support
- This plate can use costar stabilizers as well as Cherry PCB stabilizers.
- Left shift ight shift nter backspace all can be splited.
Bestseller No. 12
Cherry Original Plate Mount Plate Stabilizers Satellite Axis 7u 6.25u 2u for MX Mechanical Keyboard...
- Cherry original stabilizers are more silent when clicking,OEM stabilizers tactile feeling is more strong however it's bigger noise.
- The wire thickness is around 1.6mm
- Exact size for the Steel wire: 7u is 4.525 inch 6.25u is 3.98 inch 6u is 3.8 inch 2u is 1 inch
- 60 87 Stab set is 1x6.25 (6u or 7u) +4x2u which can be used for GH60 87 Tenkeyless Keyboard
- 104 Stab set is 1x6.25 (6u or 7u) +7x2u which is used for 96 104 108 keyboard
Bestseller No. 13
Genuine Cherry (GMK) Screw-in Stabilizers (60%/TKL)
- Genuine Cherry Screw-In stabilizers
- Multi Layout
- Screw and washer include
- Stainless wires
SaleBestseller No. 14
ZugGear V2 PCB Mount Screw-in Stabilizers Translucent Smokey Gold Plated 2u 6.25u 7u Keycap...
- DUROCK V2 PCB Mount Stabilizers are with NEW Non-Stripping Wire Design, fits for MX-compatible PCBs.
- The V2 Outer Casing wire holding clasp made to prevent stripping of the wires, different from regular Cherry PCB mount stabilizers and others.
- Translucent Smokey housings and the Golden Wires set gives your board a clear and golden edge.
- Polymer Nylon outer Casing-- Higher Hardness, Gold-plated Stainless Steel Wires and Screws-- Oxidation Resistance.
- Pre-clipped Insert method, no need to clip the feet. Fit for 60% and 80% Keyboard Set. ( Washers, 6.25u and 7u Wire included )
SaleBestseller No. 15
DUROCK Transparent Clear Plate Mount Stabilizer, 2U 6.25U 7U Gold-Plated Wires Compatible with...
- DUROCK Clear Plate Mount Stabilizers is redesigned for Cherry MX Stabilizers Compatible Plates, specially made to reduce wires popping.
- Well-Selected Premium Polymer Polycarbonate Housing and Stem are able to be Full Clear color as DUROCK V2 screw Stabilizers to match any boards and...
- The Stem / Slider of DUROCK Stabs is with a flat bottom design which is different from Genuine Cherry Plate Mount Stabilizers, no necessary to clip...
- Gold-plated Stainless steel wire is sourced from Korea, with higher hardness and oxidation resistance, brings your boards a golden edge.
- DUROCK Clear Plate Stabilizer fits for 80% TKL Keyboard Set ( 2ux4, 6.25ux1, 7u Wirex1)
Bestseller No. 16
20pcs/Pack Mechanical Keyboard PCB Stabilizer Satellite Switch Film PTFE/Silica Gel Adjust The Big...
- 【Material】Teflon
- 【Suitable for】PCB satellite switch
- 【How to use】Remove the 3M or transparent PC anti-sticking layer first, and then separate each rubber pad.
- 【Warm Tips】Please follow the instructions, otherwise the product will be separated or twisted.
- 【Packing】20pcs/Pack
Bestseller No. 17
STABILicers Hike XP Traction Cleats for Hiking on Snow and Ice,Grey/Green, Small (1 Pair) (207821)
- Pair of rugged traction Cleats for hiking or walking on ice and snow; fits securely over winter boots to reduce the risk of falls
- Features full-sole coverage with cleats on heel and forefoot to maintain traction, without altering stride
- Adjustable Sure-Fit binding system includes a series of hook-and-loop straps and contoured insole for a secure fit
- Cleats are designed to stand up to all day use on anything from frozen streams to ungroomed trails; easy to put on and take off when the terrain...
- Size Small fits shoe sizes W 5-8, M 4-7; replaceable threaded traction Cleats are compatible with anti-spark brass cleats (sold separately); Made in...
Bestseller No. 18
61keys ANSI Layout OEM Profile keycaps PBT Key Cap for MX Switches Gaming Mechanical Keyboard...
- OEM profile keycap, higher than cherry profile
- 61key keycap for mechanical keyboard, not include keyboard
- Durable PBT, Laser+silk print letters, Around 1.5mm thickness, not backlit
- Could be used for most Cherry MX Gateron MX Kailh MX and all other MX switches keyboard
- Spacebar is 6.25X, See the back of key profile picture please
Bestseller No. 19
EG Everglide Panda Stabilizer Gold Plated Plate Mounted Black White Stabilizer for Custom Mechanical...
- Everglide Panda Gold-Plated Plate Mounted Stabilizers
- Pls pay attentions: Plate Mounted Stabilizer only; If you choose GH60 or 104 Plus, 7U only contain a wire:) Not PCB stabilizer !
- Designed for MX-compatible Plate
- Stainless steel wire is made of alloy material, with gold plated tech, it has higher hardness and oxidation resistance.
- Stabilizer is made of polymer Materials which can bring better light transmission and hardness.
Bestseller No. 20
EPOMAKER Everglide Panda V3 Gold-Plate Mounted Stabilizer Set with Gold-Plated Alloy Wire, for...
- 【Everglide Upgraded Plate-Mounted Stabs】Compared with the previous versions, the Panda V3 stabs have been enhanced by applying PC to build the...
- 【High-Caliber Built with Gold-Plate Stainless Steel Wire】 The Everglide Panda V3 Stabilizers set comes with seven pieces of 2u, one of 6.25u and a...
- 【Compatible with MX Structure Plate】The Everglide Panda V3 Stabilizers are manufactured with general MX structure so that they can fit most...
- 【About EPOMAKER】Composed of a team of young gamers, software engineers, and product designers who are also mechanical keyboard enthusiasts, we set...
.
FAQ:
Q: How much does a costar-style stabilizer cost?
A: 60%/TKL Costar Stabilizer Set: $7.75 -Includes 1 x 6.25u space bar stabilizer wire, 4 x 2u stabilizer wires, 10 x plate-mounted clips, and 10 x keycap inserts Individual 2u Costar Stabilizers: $1.50 Individual 7u Costar-Style Stabilizers: $2.50
Q: What is a costar stabilizer on a keyboard?
A: Costar stabilizers are a less common stabilizer type, as they are primarily only found on older keyboards, although some newer keyboards may have them. Costar stabilizers are quite difficult to use and have to be hooked into the keycap to fit. Getting the stabilizer bar to insert properly into the keycap can be a frustrating and lengthy process.
Q: How much does a space bar stabilizer cost?
A: -Includes 1 x 6.25u space bar stabilizer wire, 4 x 2u stabilizer wires, 10 x plate-mounted clips, and 10 x keycap inserts Individual 2u Costar Stabilizers: $1.50 Individual 7u Costar-Style Stabilizers: $2.50
Q: What are the different mounting styles for cherry style stabilizers?
A: There are three different mounting styles for Cherry style stabilizers, they can attach differently and are compatible on certain keyboards. Plate-mounted stabilizers attach to the metal plate, while the other two attaches to the PCB (printed circuit board). Shown below is a side view of a keyboard with a metal plate and PCB.