2,321 (rnd) Reviews Scanned
No products found.
No products found.
FAQ:
Q: How to install ARP head bolts on SBC?
A: – Dissemble the rods to clean them properly and separate rust preventative. – Under each of the head bolts and threads, apply ARP moly lube. – Set up the rods to the piston. You must show the notches of the rods to the engine intake due to the crankshaft rotation direction. – Bring the beam and cap into alignment for installing the rods. …
Q: What gaskets to use with aluminum heads?
A: Has a 4.100″ gasket bore and a nominal compression thickness of .015″ The pre-flattened copper wire ring gaskets will not brinell aluminum heads These head gaskets are specifically designed to fit the 265-350 Small Block Chevy engine Gaskets have the strength of steel wire sealing with minimum brinelling of aluminum heads
Q: Do carburetor gaskets need sealant?
A: No, unless the gasket manufacturer states otherwise. Isealants are far overused, and often way over-applied. If mating surfaces are clean, flat, and parallel, the gaskets will seal fine. Some surfaces use sealant only, and have for years.
Q: How do you use block seal for head gasket?
A: Coolant Engine block sealer Gloves Note: Always follow the directions on the bottle of your engine block sealer. Specific directions may vary across brands,so it is important to read the instructions carefully. …