1,581 Reviews Scanned
- Dual ring scope mount available for both standard 1 inch and standard 30mm tube rifle scopes
- Slim profile design offers the weight of lightweight scope rings with the added rigidity and convenience of a one piece mount
- Mounts to any flat top Picatinny rail equipped rifle
- 2 inches of forward extension allows extra flexibility for optimum eye relief and shooting position
- 5 ounces in weight and 5 inches in total length, with a base of 3 inches and 2.5 inches of spacing between the rings
- Dual ring scope mount for 30 mm tube scopes tubes with integrated 45 degree offset micro red dot mount
- 45 degree offset micro red dot mount allows for mounting of secondary red dot sight for use at closer ranges
- Micro red dot mount compatible with Vortex Venom/Viper, Burriss Fastfire 2/3, TRUGLO TRU-TEC, UTG Micro, and all Docter/Noblex footprint pattern red...
- Mounts to any flat top Picatinny rail equipped rifle platform
- 2 inches of forward extension allows extra flexibility for optimum eye relief and shooting position
- Scope mount for Crickett rifles
- Specifically for chipmunk and Crickett bolt action rifles
- Use 3/8 inch dovetail rings
- Compatible with 3/4", 7/8", and 1" bodies
- Provides a perfect fit for chipmunk and Crickett rifles
- Mounting rings are pushed forward 2" for better eye relief
- Designed for mil-spec upper receivers with 1913 Picatinny rail
- 6061 T6 extruded aluminum construction
- MIL-A-Type 3 black hard-coat anodize
- Ridged and lightweight; Made in the USA
- Double scope ring mount for 11mm dovetail rail, specialized scope mount for Airgun/.22 Rails.
- Design in hollowed-out configuration between the ring and the bottom of the base, to release heavy duty when clamping your scope.
- Lightweight: 1.15oz per ring. High profile, 20mm/0.79in gap from base of mount to bottom of rings. ( Item height: 1.97'')
- The ring is for most scopes which are in 1''/ 25.4mm scope tube.
- With only 1 rail clamp screw and 1 scope clamp screw per side, quick and easy to install. Precision and Repeatable Alignment.
- These Vortex Hunter Rings position the center of the riflescope tube at a height of 1.22 inches (31.0 mm) from the base.
- Mounting to a Picatinny or Weaver type rail, the standard, 2-screw Hunter rings are a nice match for general hunting setups.
- Made from aircraft-grade 6061-T6 aluminum for optimum strength.
- Sold two rings per package.
- ✌ Precision Material - Premium out of aircraft grade aluminum alloy and black hard coat anodize finish, sturdy & durable.
- ✌ Convert 11mm Dovetail to 21mm Picatinny Rail - 2.94 inches length at the base, the picatinny rail extends 3.94 inches allowing for more flexible...
- ✌ Mount Base - Fit 11mm dovetail mounts, Base mount 3/8" to 7/8" converter adapter. Low profile 0.59" riser rail for scope.
- ✌ Top With 9 Slots Weaver Style Rail - Top 21mm picatinny rail allows for the mounting of picatinny or weaver standard scopes, red dots or other...
- ✌ Easy To Install - Rail adaptor installs easily via dovetail mount and one vertical stop pin, attached allen wrench can help you to tight stable...
- This red dot scope mount cannot be an assault weapon part or accessory. It just design for red dot scope.
- Monstrum Ultra Series mounts are meticulously machined from the ground up from a single block of 6061 grade aluminum instead of pre-shaped extruded...
- Rings are precision aligned right out of the box, requiring no lapping or modification
- Provides a rigid unibody scope mounting platform that is guaranteed to hold zero against the toughest of recoil
- Extended dimensions with 2.8 inches of spacing between scope rings for accommodating larger scopes with larger middle segments that will not fit into...
- Picatinny base mounts to any standard Picatinny mounting platform with custom Picatinny locking bolts that slot seamlessly into rail slots with zero...
- 1.00 inches in height, measured from the center of the rifle scope tube to the bottom plane of the Picatinny rail mount
- Monstrum Precision Scope Rings are precision crafted to a given height specification to match your particular rifle setup and preferred cheek weld
- 1 inch diameter rings for mounting standard 1 inch rifle scope tubes
- Available with either Picatinny or Weaver standard base
- Available in four heights to match your needs: 0.80 inch, 1.00 inch, 1.20 inch, and 1.35 inch
- Model #177094 - Mark scope mount in size 30mm in Matte finish
- FOR MODELS 47 74 AND 103 SERIES. GREAT FIT ON PALMETTO, ARSENAL, CENTURY, RILEY DEFENSE, RUSSIAN, AND CHINESE MODELS
- QUICK DETACH FOR REPEAT ZERO LOCKING
- CENTERED OVER BORE AXIS
- 1 year warranty against defects in materials and workmanship that adversely affect the operation for a period of one (1) year from the date of the...
- NEW AND IMPROVED TOLERANCES TO ELIMINATE ADJUSTMENT NUT ROTATION WHEN INSTALLED
- Dual ring scope mount available for both standard 1 inch and standard 30mm tube rifle scopes
- Slim profile design offers the weight of lightweight scope rings with the added rigidity and convenience of a one piece mount
- Mounts to any flat top Picatinny rail equipped rifle
- 2 inches of forward extension allows extra flexibility for optimum eye relief and shooting position
- 5 ounces in weight and 5 inches in total length, with a base of 3 inches and 2.5 inches of spacing between the rings
- Use this cantilever mount for mounting 30 mm telescopic sights.
- The 2-inch offset of this cantilever mount positions the scope in a forward location, allowing the correct eye relief and head placement.
- The cantilever ring mount positions the center of the riflescope tube at a height of 1.59 inches (40.39 mm) from the base. Weighs 6.7 ounces
- Aluminum construction
- Weighs 6.7 ounces
- QUICK MOUNT: Hiram's lightweight 5.96-ounce scope mount comes with pre-set ring spacing and quick release screws to allow for fast and simple...
- DURABLE CONSTRUCTION: Our cantilever mounts are constructed from lightweight and sturdy aircraft-grade 6061-T6 aluminum alloy; the torx screws are...
- LONG RANGE: Hit your target from hundreds of yards away since our scope mount's tilt angle allows you to zero in your gun at a greater distance for...
- CANTILEVER DESIGN: Our monolithic scope mount's cantilever design allows you to position your scope up to 2 inches forward for optimal eye relief and...
- SATISFACTION GUARANTEED: Our scope mount has been rigorously tested to improve effectiveness and provide the highest-quality firearm accessory on the...
- Universal shoulder strap for your all kinds of needs :iPad case, Camera Notebook case,Laptop Computer bags, Luggage bag, Briefcase ,Messenger bags...
- Replacement shoulder strap adjusts from 32 - 61 inch which is flexible and convenient to fit you need. Strap Width : 1.5 inch, comfortable than other...
- Adjustable shoulder strap is made of high nylon. Durable ,breathable and easy to carry .Top grade materials will provide you with years of use .
- Easily attaches to shoulder strap from your bag/case,and quickly disconnects.Feel Lighter than its Real Weight. Anti-slip surface prevents strap from...
- What You Get: 1 × Detachable & Adjustable Shoulder Strap. Guarantee by GROLEOA 60 days full refund for any quality problem, 1-year warranty, and...
- Lightweight Aluminum Design
- Punisher Tested And Verified
- Stanag Fit Which Means More Contact Area With The Picatinny Rail For An Exact Fit
- Dedicated scope rings for the Dovetail (11mm/3/8 inch) mounting platform | Not compatible with other dovetail formats, Weaver, or Picatinny platforms
- Dovetail rails are commonly found on air rifles, air pistols, and select model .22 rifles
- The scope rings are 1 inch in diameter and are compatible with standard 1 inch tube rifle scopes
- The high profile design with see-through base allows for the simultaneous use of iron sights without removal of the scope
- All Monstrum mount and accessory products come with a lifetime guarantee
- Double scope ring mount for Picatinny/ Weaver Rail (21mm).
- Design in hollowed-out configuration between the ring and the bottom of the base, to release heavy duty when clamping your scope.
- Built-in tape inside per rings to prevent from marring the scope, also prevent sliding and holding postion accurately.
- The ring is for most scopes which are in 1 inch / 25.4mm scope tube. High profile, 0.71 inch gap from base of mount to bottom of rings. ( Item height:...
- With 1 rail clamp screw and 2 scope clamp screw per side, ensure mount any 1 inch scope firmly, just twist off the nut and mount the base on the 21mm...
- Made in the USA
- Picatinny-style base and compatible with Picatinny or Weaver scope rings.
FAQ:
Q: What is UAG apparel?
A: UAG Apparel is here! Introducing UAG Apparel, get the most out of your day in gear built for you to go further. Brought to life by designers who know what it takes, our clothes and equipment will push your limits just as hard as they pushed theirs—day after day. STRONG IS BEAUTIFUL. Design with Intent. Made for Protection.
Q: What is [U] by UAG?
A: [U] by UAG delivers a collection of stylish and sophisticated accessories to keep your tech protected. From the gym to the office to wherever—let your sleek, U statement pieces do the talking. The rumors are true.
Q: Does UAG do 2-day shipping?
A: Get your products faster with UAG 2-day shipping for domestic US based orders for $2.99 Available on all products with the following restrictions: 2-Day Shipping is unavailable for the Standard Issue 24-Liter Back Pack, Standard Issue 18-Liter Back Pack, [U] Mouve Back Pack, and Purist Water Bottle The rumors are true.
Q: Is there a 60% off sale at UAG?
A: The rumors are true. For a limited time you can get up to 60% off of some of our most popular cases and more! Don’t waste any time and save now. Prices as shown on the product page. UAG Apparel is here! Introducing UAG Apparel, get the most out of your day in gear built for you to go further.