3,598 Reviews Scanned
- Effective for sealing exhaust joints subject to elevated temperatures
- Ideal for "out-of-round" muffler and pipe connections
- Cures in minutes
- New Walker accessories help to ensure effective exhaust repairs
- Walker supplies all of the accessories you need to do the complete exhaust job
- J-B WELD HIGHHEAT: A hand mixable two part epoxy putty stick that is formulated to repair and rebuild materials that will be exposed to high...
- CURE AND SET TIME: After kneading the two part formula together by hand, HighHeat takes 1 hour to set and cures in 8 hours. J-B Weld HighHeat set and...
- PRODUCT FEATURES AND STRENGTH: J-B Weld HighHeat has lap shear strength of 800 PSI at room temperature and 600 PSI at 400oF (204oC) or more. HighHeat...
- MAJOR USES: Exhaust Manifolds, Tail Pipes, Mufflers, Engine Blocks, Duct Work, Machinery and other high temperature equipment.
- DO IT YOURSELF: Big or small, you can DIY it with J-B Weld. Our heavy duty epoxy and adhesives repair & restore it right the first time. J-B Weld...
- Permanently repairs holes and leaks in exhaust systems
- Seals out fumes at temperatures up to 2000F
- Safe for catalytic converters
- 2 pouch bonus pack
- Suggested Applications: Mufflers, tailpipes, joints and catalytic converters
- Hylomar exhaust repair putty - 250g
- Water-based heat curing repair putty designed for use in the repair of small cracks and holes in exhaust systems
- Will resist the conditions typically found in vehicle exhaust system
- The asbestos-free formulation is designed to withstand temperatures of up to 1000°C
- Gun Gum exhaust sealant has been used by motorists for many decades
- Its modern and long-lasting formula makes it easy to repair your exhaust yourself quickly and inexpensively
- Seals holes and cracks in the exhaust system
- Repair without dismantling
- Gun Gum ready-to-use sealant.In a 200 g metal tin
- Jb Weld Extreme Heat: Is Formulated For Repairs To Iron, Steel And Metal In High Temperature Environments 1000°F / 537°C. Non-Flammable, It Contains...
- The Original Cold Weld: Jb Weld Was Developed As An Alternative To Torch Welding. Designed To Be Effective In Extreme Environments, Once It Sets, It...
- Simple To Use: When Fully Cured, This Metallic Compound Can Be Drilled, Machined Or Sanded. It Is Great For Repairing Cracks, Small Gaps, Seam...
- Versatile & Dependable: Ideal For Repair Work On : Exhaust Manifolds, Pipe Connections, Mufflers, Catalytic Converters, Outdoor Grills, Fire Boxes,...
- J-B Weld Muffler Seal: MufflerSeal is an iron reinforced paste designed to seal mufflers, pipe joints and exhaust systems. MufflerSeal can resists up...
- Cure Process: MufflerSeal can cure in two ways: By allowing the product to fully harden after it has been applied which can take up to 24 hours (time...
- Projects: Mufflers, Pipe Joints and Exhaust Systems.
- Package Weight: 12.5 ounces
- Permatex 80335 Muffler and Tailpipe Sealer, 3 oz. 3-Pack
- 【PERFECT SEAL AGAINST NOXIOUS FUMES】Visbella Exhaust Cement is a thick and non-slumping paste type repair material. It will set when heated,...
- 【HIGH TEMP UP TO 2012℉】Visbella Exhaust Cement sets hard with heat and can withstand temperatures up to 2012℉. It cures by evaporation of...
- 【MULTIPLE APPLICATIONS】Specialty formulated for the assembly of all joint of exhaust system, including mufflers, tailpipes, catalytic converters,...
- 【EASY TO REPAIR AND COST-EFFICIENT】Simple operation, long maintenance time. No experience required. No special skills needed. Store in a cool, dry...
- 【ENVIRONMENTLY FRIENDLY】Repair the exhaust pipe to avoid air pollution, noise pollution, extend the life of the auto, and pass the annual vehicles...
- J-B Weld Steelstik: A Hand Mixable Two Part Epoxy Putty Stick That Is Steel Reinforced & Non-Rusting To Quickly Repair Or Rebuild Anything Made Of...
- Cure And Set Time: After Kneading The Two Part Formula Together By Hand, Steelstik Takes 5 Minutes To Set And Cures In 1 Hour. J-B Weld Steelstik Set...
- Product Features And Strength: J-B Weld Steelstik Has Lap Shear Strength Of 900 Psi, Can Withstand Continuous Temperatures Up To 350F (176C ) And...
- Surface Applications: Iron & Stainless Steel, Copper & Brass, Aluminum & Bronze, Fiberglass And Plastic & Pvc
- Seals holes and leaks in mufflers, tailpipes and around joints
- Makes new installations more secure
- Waterproof, non-shrinking paste formula; shock resistant
- Temperature Range: up to 2000°F (1000°C)
- Suggested Applications: Mufflers, tailpipes, joints, and catalytic converters; exhaust system must be cool before applying
- J-B Weld Exhaustweld: A High Strength Fiberglass Wrap, Impregnated With A Specially Formulated Resin For High Temperature Resistant Repairs....
- Cure And Set Time: Exhaustweld Can Cure With Or Without Heat! It Will Cure Within 20 Minutes If Heat Is Applied To It With Either A Heat Gun Or By...
- High Heat Resistance: Once Fully Cured, J-B Weld Exhaustweld Exhaust System Repair Wrap Has A Temperature Resistance Of 1100°F, Allowing It To Be...
- Applications: Manifolds, Catalytic Converters, Mufflers, Tailpipes And More
- 【PERFECT SEAL AGAINST NOXIOUS FUMES】Visbella Exhaust Cement is a thick and non-slumping paste type repair material. It will set when heated,...
- 【HIGH TEMP UP TO 2012℉】Visbella Exhaust Cement sets hard with heat and can withstand temperatures up to 2012℉. It cures by evaporation of...
- 【MULTIPLE APPLICATIONS】Specialty formulated for the assembly of all joint of exhaust system, including mufflers, tailpipes, catalytic converters,...
- 【EASY TO REPAIR AND COST-EFFICIENT】Simple operation, long maintenance time. No experience required. No special skills needed. Store in a cool, dry...
- 【ENVIRONMENTLY FRIENDLY】Repair the exhaust pipe to avoid air pollution, noise pollution, extend the life of the auto, and pass the annual vehicles...
- FIBERWELD AUTOMOTIVE REPAIR CAST: A high-strength fiberglass wrap, impregnated with a specially-formulated resin for automotive repairs. When...
- SOAK IT, WRAP IT, DONE: Once the wrap is dipped in water for 5-7 seconds, FiberWeld Automotive Repair Cast has a working time of about 5 minutes and a...
- PRODUCT FEATURES AND STRENGTH: Once fully cured, J-B Weld FiberWeld Automotive Repair Cast has a temperature resistance of 400°F, holds water...
- AUTOMOTIVE APPLICATIONS: Radiator & heater hoses, tailpipes & mufflers, oil & transmission lines, vacuum lines, outside mirrors & roof racks, and RV &...
- EVERYTHING YOU NEED: The kit includes a pair of gloves and a 2" x 24" securing bandage!
- Package dimensions :36.0" L x2.0" W x3.0" H
- Quick Repair: Fiberglass repair tape is a high-strength, one-time use fiberglass wrap that is impregnated with a special resin formula, allowing it to...
- Cure and Set Time: Once the product is dipped in water for 5-7 seconds, you will have between 5-10 minutes to work with the product and then it will...
- Easy to use: Pour water into the bag for 5-7 seconds, squeeze out excess water, quickly wrap on the repair surface, the fiber strip begins to cure in...
- Multipurpose: The fiberglass tape can seal cracks and joints, fiber optic cables, gardening tools, dock piles, car exhausts, pipes, and other...
- Cost-effective: The huge cost of replacing new parts can be solved with minimal cost.
- Welds cracks and holes in iron and steel
- Withstands temperatures to 2400 degree Fahrenheit
- Strength increases with heat
- Fills cracks and holes and pits
- Great for boilers, stoves, BBQ's, furnaces, heaters
- A special high-temperature joint sealing compound which is resistant to corrosive exhaust heat and gases
- Can be forced into small openings and cracks
- Can be forced into small openings and s
- A special high-temperature joint sealing compound which is resistant to corrosive exhaust heat and gases
FAQ:
Q: How much is exhaust repair?
A: How much does it cost to fix cracked exhaust? The number for an exhaust manifold repair cost is an average of between $570- $900, with the labor taking up the majority of this price at between $400 and $550 of that, and the ports running you between $130 and $340 for the total cracked exhaust manifold repair cost.
Q: How to repair a small leak with epoxy putty?
A: Turn off the water supply line in the house. Drain the damaged line and ensure that the area to be patched is clean and dry so that the epoxy putty will properly adhere to the pipe. Tear off enough plumbing epoxy putty to fully cover the surface around the leak. Knead the putty until it is pliable enough for application. Apply the putty to the pipe.
Q: How to repair a flex pipe exhaust?
A: – Exhaust heat shield – Tail pipe bandage – Tail pipe sealer – Two exhaust clamps – Axle stands
Q: How to repair plumbing with putty?
A: Pull out a golf ball size of the putty. Roll it in your hands to get it warm Now start rolling it into a snake-like shape Make it as long as you need Clean the area that you will use the putty Dry surface with a rag or towel Lay the rope shaped putty into the place where the seal is to be Press into place until secured to the surface