3,352 Reviews Scanned
- Equipped with locking handle that has quick release feature for easy transport
- Power Lock bar provides crisp bends without oil canning/warping
- Cam locking system consists of aluminum and ultra high molecular weight polyethylene wedge
- Powerlock bar for stronger clamping pressure
- Siding Bender includes two military grade aluminum castings
- Bends soft aluminum, galvanized steel, trim, and copper coil
- Improved bending handle prevents marring of materials
- Makes multiple types of bends and trims
- Patented inside working pockets and 2 3/8" (6,0 cm) mouth opening
- Throat Depth: 19in. Number of C Castings: 5. Weight: 121 lbs.
- Stores material inside bender--reduces handling and flipping of material and speeds up bending
- Lightweight, high-tech anodized alloys and computer designed die castings
- Patented "Moving Pivot Hinge" increases bending power without marring material
- Patented inside working pockets and 2 3/8" (6,0 cm) mouth opening
- Throat Depth: 14in. Mouth Opening: 2-3/8in. Number of C Castings: 5. Weight: 106 lbs.
- Locking system design provides more clamping power with less effort
- Locks on a wider variety of material thicknesses with no need for adjustments
- Stainless steel bending edge. Accurate built-in depth gauges
- Capable of 130 degree overbends
- Throat Depth: 14”. Mouth opening: 3/4”. Number of C Castings: 5. Weight: 104 lbs.
- Equipped with locking handle that has quick release feature for easy transport
- Power Lock bar provides crisp bends without oil canning/warping
- Cam locking system consists of aluminum and ultra high molecular weight polyethylene
- Includes two military grade aluminum castings
- 20" throat depth. The number of C Castings will vary depending on the brake ordered. 10'6" Contractor Model brake has 4 C's.
- The portable bender is designed for thin plate up to 0.7mm thic
- Available treatment sheet following material, steel, brass, copper etc , include painted or coated
- Efficient pulling motion of the handle keeps the material in place without moveing when bending and cutting
- Independent bending handles allow easy operation
- Stores material inside bender--reduces handling and flipping of material and speeds up bending
- Lightweight, high-tech anodized alloys and computer designed die castings
- Patented "Moving Pivot Hinge" increases bending power without marring material
- Patented inside working pockets and 2 3/8" (6,0 cm) mouth opening
- Throat Depth: 19in. Number of C Castings: 4. Weight: 96 lbs.
- Make multiple bends in fascia
- Strengthens fascia against oil canning
- Gives decorative appearance to your trim work
- Makes brick mold quick and easy
- Lightweight, easy to carry
- Locking system design provides more clamping power with less effort
- Locks on a wider variety of material thicknesses with no need for adjustments
- Stainless steel bending edge. Accurate built-in depth gauges
- Capable of 130 degree overbends
- Throat Depth: 14”. Mouth opening: 3/4”. Number of C Castings: 4. Weight: 86 lbs.
- New Version 2.0 - Fits Both Tapco and Van Mark 10'6'' Brakes - Can Be Cut to Length for Shorter Brakes
- Powerful Rare Earth Magnets Hold Brackets on the new upgraded and improved zinc plated Bar - Will not Fall Off Easily but Very Quick to Relocate
- Includes Everything Required to Install on your Tapco Brake or Van Mark Brake
- Integrates Measurements Directly on Your Brake
- Quick, Efficient, Accurate - For Siding, Roofing & Gutters Applications
- Stores material inside bender--reduces handling and flipping of material and speeds up bending
- Lightweight, high-tech anodized alloys and computer designed die castings
- Patented "Moving Pivot Hinge" increases bending power without marring material
- Patented inside working pockets and 2 3/8" (6,0 cm) mouth opening
- Throat Depth: 14in. Mouth Opening: 2-3/8in. Number of C Castings: 6. Weight: 129 lbs.
- Stores material inside bender--reduces handling and flipping of material and speeds up bendingStores material inside bender--reduces handling and...
- Lightweight, high-tech anodized alloys and computer designed die castings
- Patented "Moving Pivot Hinge" increases bending power without marring material
- 180 degree hemming capability for making more rigid panels
- Throat Depth: 19in. Number of C Castings: 3. Weight: 90 lbs.
- Toggle Lock system allows material to be entered from both sides of the brake
- Dual support base rails are used for additional foundation and for inhibiting twisting and torquing while bending
- Siding Bender uses military grade aluminum castings for strong and solid clamping pressure
- Slide locking bar allows for easy use and transport
- Non-marring vinyl strip protects metal while being bended
- 🔧【Part Number】The siding brake replacement parts are suitable for tapco with part number 10818, please check the part number and product part...
- 🔧【Suitability】Siding metal brake parts for current Maxmimum XL 10"6", Pro 14 10"6" HD, Pro 14, Pro 19, Pro II, Pro III, and Pro 2000 12'6"...
- 🔧【Easy to Install】Siding brake parts are very easy to replace, you just need to replace the old/broken/lost/unsuitable parts. Tip:Note that...
- 🔧【High Quality】Siding brake accessories are made of high quality and durable metal for excellent corrosion resistance as well as toughness,...
- 🔧【2 Years Warranty】I will offer 2 years warranty for the 10818 tune up kit, I am confident with the product, full refund is available for you...
- Stores material inside bender--reduces handling and flipping of material and speeds up bending
- Lightweight, high-tech anodized alloys and computer designed die castings
- Patented "Moving Pivot Hinge" increases bending power without marring material
- Patented inside working pockets and 2 3/8" (6,0 cm) mouth opening
- Throat Depth: 19in. Number of C Castings: 6. Weight: 147 lbs.
- Collapsible Siding Brake for Tapco & Van Mark Brakes - Fast & Easy Setup
- Tapco 10-foot, 6-inch MAX-I-MUM II XL system comes with Tapco's MAX snap stand with wheel kit and MAX Cut-Off
- Lightweight, portable brake fabricates a range of commercial and residential siding, trim and utility pieces
- Wide throat and mouth openings accommodate large-size stock and preformed material
- Double-ribbed die castings enhance the structural integrity of the Tapco siding brake frame
- Portable design makes it easy to bring to the job site
- 【Compatible】11397 faspin kits for Tapco PRO 14, PRO 19, Windy, Maximum, & MX
- 【Material】11397 Pull Pins Made of high quality stainless steel, abrasion resistant and durable
- 【Prompt】Please check the part number before ordering, Pull Pin for Tapco brake 11397, Not applicable if the part is coded differently
- 【Can be received】The bag will contain 4 Pull Pins to completely replace old or damaged parts
- 【Perfect Service】If you have any questions about our products, such as product quality, models, size, return, exchange, refund, etc., please feel...
- ✔ 2-Way Cutting - First ever siding brake cutter / Cut-off tool to cut effortlessly in both directions (right to left + left to right). -- Fits all...
- ✔ 1" Offset Cuts - Three cutting wheels make accurate, clean and effortless cuts at 1" offset up yo 2 layers of aluminum coil stock or up to 24...
- ✔ Stays On The Brake And Out Of The Way - With roller wheels, the 2-Way Cut-Off Tool is anchored to the brake's anvil. This allows it to travel the...
- ✔ Fits And Works On Tapco Sidewinder & Van Mark Coil Dispenser - Can be used to cut coil stock lengths off your Tapco brake Side-Winder or Van Mark...
- ✔ Light Weight + Quality & Durability - Lightest portable siding bender cut-off tool in the industry (Half the weight) for easy handling - Long...
- 🪛Part Number: Please check the part number and product part photo carefully before order, the bolts are suitable for Tapco brake, it will not...
- 🪛Solve Problems: The 10351 lifting handle assembly will help you repair your siding brake handle well, if you siding handle can not be sit tightly,...
- 🪛Durable Material: #10351 Made of high quality stainless steel, it is durable enough, you do not need to worry about the quality.
- 🪛How to Install It? First, remove the old handle assembly from the siding brake machine. Second, install the new bolt kit. Third, test if it works...
- 🪛One Year Warranty: I will offer 12 months warranty for the siding brake handle assembly replacement, and I am confident with the product, full...
FAQ:
Q: How to bend coil siding without a siding brake?
A: Cut two 2-foot-long sections of 2-by-4 lumber using a saw. Screw hinges to one of the 2-inch sides of one board. … Lay the board with the hinges down so that the 4-inch side is on your work surface and the hinges are pointing up. Lay the homemade brake on the work surface with the two pieces of wood open and the hinges facing up.
Q: What is a siding brake used for?
A: Is the product durable? Is the product easy to use? What are the dimensions of the product?
Q: What is bending brake?
A: Binding caliper pins Caliper piston frozen Excessive brake component corrosion Parking brake cable binding (rear brakes) Damaged brake shoes (rear brakes) Overfull brake fluid Bad brake hose
Q: What is aluminum brake?
A: An aluminum siding brake is used to bend metal precisely so that no mistakes are ever made. This will mean that you never have to worry about wasting expensive material. Aluminum siding is a very soft material and this makes it very easy to work with, however, it must be bent into the right shape.